Microhardness and fracture toughness of ZrO2–Sc2O3 solid electrolyte, doped with rare-earth and transition metals

2017

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1134/s002016851709014x
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The influence of low concentrations (1 mol %) of co-dopants (Y, Ce, Gd, Er, La, Zn, Mn, Co and Cu) on the microhardness and fracture toughness of Zr 0.81 Sc 0.19 O 2–δ (10.5ScSZ) solid electrolyte was studied by the indentation method. It was shown that co-doping of 10.5ScSZ by the rare-earth elements (Y, Ce, Gd, Er) results in microhardness increase on 4–45% due to stabilization of cubic phase in the grains, while the microhardness changing upon transition metals (Mn, Cu, Co, Zn) introduction is caused by the grain boundaries modification. The microhardness decreases on ~4 and 10% upon doping by Mn and Cu, accordingly, whereas the introduction of Co and Zn results in its increase approximately by 2 times. It was shown also that the influence of all investigated dopants on the fracture toughness is insignificant. The maximal effect observed for Cu was the fracture toughness increase from 2.1 up to 2.6 MPa m 0.5 .