Optimization of the Compositions of the High Strength Casting Aluminium Alloys Based on Nickel Eutectic

2014

Толық мәтін Ашық қол жеткізу: Hybrid Метадеректер (CSL-JSON)
DOI 10.4028/www.scientific.net/amr.911.152
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The phase composition of the AlNiMnFeSiZr system was analyzed with respect to new-generation heat resistant casting aluminum alloys based on a Ni-containing eutectic, which are strengthened by the Al3Zr (L12) nanoparticles. It is shown that the presence of iron and silicon considerably complicates the phase analysis compared with the AlNiMnFe base alloy. Alloys with low silicon content have a sufficiently good casting property, which enables fabrication of thin-walled castings, not inferior to AA356 alloy types widely used to cast complex shapes. Addition of silicon to the AlNiMnFe base alloy sharply deteriorates hot cracks. Silicon greatly decreases the solubility of Zr at (Al), which is reflected on hot brittleness of Al2%Ni1%Mn0,5%Fe-0,2%Zr system alloys.