Аңдатпа
Experience shows that the trend towards using solid fuels in the energy sector of Kazakhstan will be implemented for a rather long time. At the same time, the global trend is currently tightening environmental requirements. They set the task to continue improving coal combustion efficiency and minimize emissions of harmful substances and greenhouse gases into the atmosphere. This article aims to conduct complex thermal engineering tests of the KCVr-0.43 hot water boiler. For this, the following measurement and control tools were used: the standard boiler room secondary devices, an industrial gas analyzer Testo-350, a control (reading) module Testo-454 with temperature probes and a Pitot tube, a soot number meter Testo-308, a temperature meter 2TPM1, a portable liquid flow meter Vzlet-PRC and a stopwatch. All they had valid verification and calibration certificates. An analysis of the gas composition and technical parameters of the KCVr-0.43 hot water boiler in the investigated operation mode with Shubarkul coal during a long-term test showed that it seems possible to operate boilers of this series under low load conditions without boosting air and fuel. They can reduce emissions of toxic NOx and greenhouse gases CO2 into the atmosphere. In this case, burning Shubarkul coal without forcing through the air is characterized by significant carbon monoxide CO emissions. The formed nitrogen oxides NOx decompose in reactions with CO with the formation of molecular nitrogen and oxygen. Burning, coke residue in the layer, coal-burning stages, emissions of harmful substances.