3-D modelling of heat and mass transfer during combustion of low-grade coal

2020

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.2298/tsci191107062s
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Using numerical methods, the basic characteristics of heat and mass transfer processes in the furnace chamber of the BKZ-75 boiler of the Shakhtinskaya TPP (Kazakhstan) were studied during a forced partial stop of the supply of coal dust through the burners. Two modes of fuel supply were studied; a direct-flow method of supplying air mixtures, when two direct-flow burners are working and two are in emergency mode and vortex method of supplying air mixtures - two vortex burners with a swirl angle of the air mixture flow and their inclination the center of symmetry of the boiler by 30? and two are in emergency mode. The computational experiments allowed to obtain the distributions of the total velocity vector, temperature fields, concentration fields of CO, NO2 throughout the entire volume of the combustion chamber and conduct a comparative analysis for the two investigated emergency mode (direct-flow and vortex). Based on the results, it can be concluded that in the case of a forced partial stop of the supply of coal dust, the use of the vortex method of supplying air mixtures improves heat and mass transfer processes and allows minimizing emissions of harmful substances.