Technology of Processing of Ash and Slag Waste of Thermal Power Plants by Sintering

2022

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.52209/1609-1825_2022_4_103
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The aim of the study is to select the optimal composition of the sintering charge for maximum extraction of alumina. The experiments have shown that sintering using two-component charges allows to extract alumina from the obtained sinters by no more than 60%. The highest sintering rates were obtained using three-component charges. Thus, when using ash and slag waste from Almaty CHPP-2, the extraction of alumina amounted to 83.68% on the charge of the composition CaO : SiO2 = 2; Na2O : (Al2O3 + Fe2O3) = 1 during sintering in the interval of 60 minutes at a temperature of 1200°С, under the same conditions, 87.07% recovery was obtained for ash and slag waste of the Eurasian Energy Corporation, for ash and slag waste after chemical activation, recovery was – 90.2%. The experiments have shown that the production of self-disintegrating sinters suitable for further processing from the tested samples of ash and slag waste is possible with the use of three-component charges