Highly sensitive microgrid protection using overcurrent relays with a novel relay characteristic

IET Renewable Power Generation, 2020

Толық мәтін Ашық қол жеткізу: Green Метадеректер (CSL-JSON)
DOI 10.1049/iet-rpg.2019.0793
Деректер сенімділігі 85 жоғары
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Following the high penetration of synchronous generators (SGs) in the power network, optimal overcurrent coordination improvement under faulty conditions has become a crucial problem. To reduce the overcurrent relay operating time, a new overcurrent relay curve is proposed in this study. Then, the overcurrent coordination problem is overcome by using a robust combinatorial optimisation method. Additionally, SG sizing and location is performed to verify the merits of both the proposed relay curve and the applied optimisation algorithm. The proposed relay curve performance is compared with other non‐standard relays characteristic available in the literature for a standard microgrid. Then, the proposed relay curve is applied to both the 8‐bus transmission and the 33 kV distribution portion of the 30‐bus IEEE standard power test systems. Then, the SG transient stability for different fault locations is analysed. Finally, an accurate comparison between the proposed relay curve and standard/non‐standard curves available in the literature is provided by applying the same optimisation method and network topology. The simulation results confirm the superiority of the proposed relay curve.