Development of a circulating fluidized bed partial gasification process for co-production of metallurgical semi-coke and syngas and its integration with power plant for electricity production

2019

Толық мәтін Ашық қол жеткізу: Green Метадеректер (CSL-JSON)
DOI 10.1080/19392699.2019.1674842
Деректер сенімділігі 85 жоғары
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Coal, coke, and semi-coke are currently irreplaceable materials in the iron and steel industry. Coal is converted to coke or semi-coke in fixed bed coke-ovens which have many drawbacks and cause environmental damage. A novel method for the production of semi-coke using circulating fluidized bed partial coal gasification is experimentally studied. The method involves a fast devolatilization stage which promises to reduce the effect on the environment compared to conventional coke-ovens. Experiments are conducted with high volatile Shubarkol coal in a custom-made atmospheric reactor consisting of a riser, a cyclone, a loop seal, and equipped with a semi-coke withdrawal system. The reactor is operated autothermally, at temperatures varying from 700°C to 1000°C. The coal feed rate varies from 40 to 70 kg/h, with a particle size distribution up to 20 mm. During the experiments, char samples are withdrawn from the riser and the standpipe. The samples have a volatile content of 3-6%, carbon content above 85%, high structural strength (92.64%), low bulk density (270 kg/m3) and high porosity (28.4%) compared to conventionally produced semi-coke. It is confirmed that even using the laboratory scale setup it is possible to produce up to 0.367 kg of semi-coke per kg of coal.