Emissions of SO3 from a Coal-Fired Fluidized Bed under Normal and Staged Combustion

2013

Толық мәтін Ашық қол жеткізу: Hybrid Метадеректер (CSL-JSON)
DOI 10.1155/2013/514751
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

This paper reports the measurements of SO3 emissions with and without limestone under unstaged and staged fluidized-bed combustion, carried out on a m2 and 2 m high stainless-steel combustor at atmospheric pressure. The secondary air was injected 100 cm above the distributor. SO3 emissions were monitored for staging levels of 85 : 15, 70 : 30, and 60 : 40, equivalent to a primary air/coal ratio (PACR) of ~0.86, 0.75, and 0.67. Experiments were carried out at 0%–60% excess air level, 1-2 m/s fluidizing velocity, 800–850°C bed temperature, and 20–30 cm bed height. During unstaged combustion runs, SO3 emissions were monitored for a wide range of Ca/S ratios from 0.5 to 13. However, for the staged combustion runs, the Ca/S ratio was fixed at 3. SO3 was retained to a lesser extent than SO2, suggesting that SO2 reacts preferentially with CaO and that SO3 is involved in the sulphation process to a lesser degree. The SO3 emissions were found to be affected by excess air, whereas the fluidizing velocity and bed temperature had little effect. SO3 was depressed on the addition of limestone during both the staged and unstaged operations, and the extent of the reduction was higher under staged combustion.