The influence of the solution of their amount on the process of water splitting by the electrolysis method

2022

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.31489/2022ph1/123-129
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The article presents the results of an experimental study of the effect of the solution and their concentration on the process of splitting water by electrolysis under the action of a direct electric current using a Hoffman device. As solutions, we used sodium hydroxide, sodium phosphoric acid, sodium carbonate, sodium sulfate, sodium metaborate, sodium phosphoric acid 2 — substituted and potassium hydroxide. The number of salts in the solution varied from 0.2 mol to 0.8 mol. The study showed that the splitting water at constant current and voltage is influenced by both the nature of salts and their quantity. So, it was found that with the same amount of substances in the solution, the process of splitting water occurs faster in a solution containing potassium hydroxide. When using an aqueous KOH solution in an amount of 0.2 mol, the volume of hydrogen released was 15 ml, and at 0.8 mol, 19.5 ml. Using an aqueous solution of sodium metaborate with a similar concentration, the volume of hydrogen released was 2 ml and 4.5 ml, respectively. The obtained results allow to choose the solution and its amount during the process of photocatalytic splitting of water.