Аңдатпа
In this chapter, results of theoretical and laboratory research of combined process “rolling-pressing” using equal-channel step matrix are described. In theoretical studies, the empirical dependences for determining forces of rolling, extrusion, and back pressure in the matrix have been obtained. A program was compiled for finding the optimal value of the angle of intersection of channels in the matrix. In the study of kinematic parameters of the process were obtained formulas for determining diameters of the rolls, the values of which would provide the best capture angle of the workpiece. During computer simulation, the parameters of stress-strain state, temperature distribution, and the influence of the tilting of the workpiece on the process parameters were studied. In the laboratory experiment, the effect of the new combined deformation process “rolling-pressing” on the evolution of microstructure of copper was studied.