Characterization of a nanoparticles-doped optical fiber by the use of optical backscatter reflectometry

2018

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1117/12.2502600
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

The use of nanoparticles is gaining large interest in modern photonic technology, mainly because nanoparticles can drastically change the properties of optical media. Here, a custom special fiber has been considered for investigation. The fiber presents a co-doped erbium and magnesium oxide nanoparticles core, and standard telecommunication size. Modified Chemical Vapor Deposition technique, together with the spontaneous phase separation, permits to grow inside the core a random distributed pattern of nanoparticles, whose size varies between 20 to 100 nm, considering the transversal section. The nanoparticle increases the scattering, which is, in general, an unwanted occurrence. Nevertheless, interesting applications can emerge in sensor field. In this work the focus has been concentrated on the distributed sensing applications offered by the enhanced backscattering. The fiber has been characterized by the use of an Optical Backscatter Reflectometer (OBR) Luna 4600. Results show that the intensity of backscattering, induced by the nanoparticles, is 50 dB larger than the one shown by standard single mode fiber. This results in an exponential decay of the reflected optical power, which vanish after 1.7 meter of propagation. Moreover, using the OBR, it has been possible to characterize the polarization properties of this special fiber. Because the nanoparticles are stretched during the drawing process, the fiber presents a well-defined polarization signature pattern, with a random alternation of polarization state every, roughly, 10 cm. These properties are promising for creating a distributed, high reflectivity, sensors, in application like OBR spatial multiplexing.