Аңдатпа
ABSTRACT In this article, the hydrodynamic behavior of dilute aqueous solutions of a natural polysaccharide—gellan in the porous media under the modeled oilfield conditions is described. The hydrodynamic properties of gellan and poly(acrylamide) solutions in saline porous media are compared. The influence of inorganic salts NaCl, KCl, CaCl2, MgCl2, and BaСl2 on sol–gel and gel–sol transitions of dilute gellan solutions was evaluated. The mechanism of sol–gel transition in the presence of individual alkaline and alkaline‐earth metal salts is described on the basis of literature data. The viscometric measurements revealed that the effectiveness of salts to enhance gelation of gellan changes in the following order: BaСl2 > CaCl2 ≈ MgCl2 > KCl > NaCl. The sol–gel and gel–sol phase transitions of gellan solution were also observed upon addition of oil field water containing 73 g L−1 of alkaline and alkaline earth metal ions. During the injection of gellan solutions into the porous media saturated by saline water an oscillation of the injection pressure was observed. Such behavior of gellan is explained by either the sol‐to‐gel and the gel‐to‐sol transitions of the polymer taking place in saline water or the step‐by‐step plugging of high permeable channels until all high permeable channels of sand packs are plugged due to gellan invasion. The application of brine‐initiated gelation of gellan for water shutoff operations (WSO) in field conditions was demonstrated. Higher technological effectiveness of gellan injection in comparison with existing gelation systems was shown. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41256.