CuO/TiO2 heterostructure-based sensors for conductometric NO2 and N2O gas detection at room temperature

2023

Толық мәтін Ашық қол жеткізу: Hybrid Метадеректер (CSL-JSON)
DOI 10.1016/j.snb.2023.134635
Деректер сенімділігі 85 жоғары
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Nitrous oxide (N 2 O) is hazardous gas extensively used in surgeries as an anesthetic and released into the atmosphere without any treatment. Despite low concentrations in the atmosphere, it has for 300 times larger warming coefficient to the greenhouse effect than CO 2 . There are only a few studies dedicated to the development of N 2 O gas sensors, but not for room temperature (RT) and ultra-low concentrations. In this study, we developed an ultrasensitive gas-sensing device operating at RT based on CuO/TiO 2 heterojunctioned nanointerfaces prepared by scalable reactive magnetron sputtering technique with glancing angle deposition. The CuO/TiO 2 heterojunctioned nanointerfaces demonstrated N 2 O gas sensitivity for ∼2 times higher than TiO 2 mono-layer, and the device exhibits an outstanding detection limit of 50 ppb at RT, quick response and recovery times (∼36 s and ∼50 s). The ultrasensitivity of gas sensor is achieved by providing control over nanoarchitecture and comparable size of the nanorods-like structure to the doubled Debye lengths (∼70–80 nm). The applied nanoarchitecture design opens a flexible platform for different gas sensing devices where the array of p-n heterojunction nanorods was utilized efficiently and with technological simplicity. The statistical analysis of variances shows that obtained data is more confident and reproducible.