Effect of the high doze of N+(1018 cm–2) ions implantation into the (TiHfZrVNbTa)N nanostructured coating on its microstructure, elemental and phase compositions, and physico-mechanical properties

2016

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.3103/s1063457616060034
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Structure and properties of (TiHfZrVNbTa)N nanostructured multicomponent coatings implanted with a very high (10 18 cm –2 ) dose of N + ions have been studied. As a result of the implantation a multilayer structure has been formed in the surface layer of the coating. The structure is composed of amorphous, nanocrystalline (disperse) and nanostructured (with the initial sizes) nanolayers. In the depth of the coating two phases (with the fcc and hcp structures) having a small volume content are formed. The nitrogen concentration near the surface attains 90 at % and then decreases with the depth. In the initial state after the deposition the coating nanohardness values are from 27 to 34 GPa depending on the conditions of the deposition. As a result of the implantation the hardness is decreased approximately by the depth of the projective ions range, i.e., to 12 GPa and then increases with the depth to 23 GPa. The investigations were conducted using the Rutherford backscattering, scanning electron microscopy with the microanalysis, high resolution electron microscopy (with local microanalysis), X-ray diffraction, nanoindentation, and wear tests.