Аңдатпа
This study investigates the use of preliminary thermochemical activation in a NaHCO3 solution under elevated pressure and temperature to modify the chemically stable and hard-to-process phase composition of various mineral raw materials and improve the recovery of valuable components. The method was tested on various types of mineral raw materials, including slag from the reductive smelting of red mud from alumina production prior to acid leaching, ash before chemical beneficiation, gibbsite–kaolinite bauxite prior to gravity separation, and nephelines, for which the sintering process was replaced with chemical beneficiation. The slag from the reductive smelting of red mud was also tested before acid leaching. The activation of slag enhanced tricalcium silicate formation lead to leaching recoveries of ~96% for rare earth elements, ~92% for TiO2, ~98% for CaO and Al2O3, and 50% for Fe2O3, compared to much lower values without activation. With ash, activation eliminated the sillimanite and hedenbergite phases, increased mullite and free silica, and formed calcite, resulting in a 15–20% higher silica recovery. With gibbsite–kaolinite bauxite, activation altered kaolinite, siderite, quartz, and hematite contents; eliminated calcium silicate; and improved the silicon modulus of the sand fraction by 35.9% during gravity beneficiation. For nepheline ore, activation promoted the formation of albite and hydrosodalite, eliminated corundum and andradite, and increased silica recovery from 33.58% to 59.6%. These results demonstrate that thermochemical activation effectively transforms mineral structures and significantly improves the efficiency of subsequent beneficiation processes.