The effect of adding Mn and Cr to the Al-Fe-Si system alloy

2025

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.36547/ams.31.3.2230
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Alloys of the Al-Fe-Si system have a complex phase composition that determines their properties. With a certain combination of temperature and composition, the conditions for the formation of the α phase are formed. However, with decreasing temperature, the α↔β transformation is observed. Suppression of the formation of the β phase is possible by doping. The main goal of this work was to substantiate theoretically the introduction of manganese and chromium into the alloy, and to explain the required number of alloying elements through a detailed analysis of the phase composition. The temperature limits for the formation of the α phase in the Al-Fe-Si ternary system and the kinetics of its recrystallisation were revealed. A justification for the value of the mass fraction of alloying elements that contribute to the suppression of the α↔β transformation with the formation of the cubic α phase was developed. The most successful suppression of the formation of the β phase occurs with joint alloying with manganese and chromium, with the formation of a predominantly cubic phase Al15Si2(Fe, Cr, Mn)4 with a volume fraction of more than 95%, which predicts the possibility of plastic processing of iron and silicon-rich alloys of the Al-Fe-Si system.