Исследование процесса горения поджигающего искрового разряда импульсно-го плазменного двигателя

Recent Contributions to Physics, 2025

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.26577/rcph20259216
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

In this study, several experiments were conducted to optimize the ignition process and investigate its impact on the formation and development of the primary plasma flow. The ignition spark is generated when the graphite rod comes into contact with the grounded electrode. On the other hand, the graphite electrode is used as fuel in the pulsed plasma thruster (PPT). The dynamics of the pulsed discharge formation were recorded using the CMOS Phantom VEO710S high-speed camera, enabling the identification of key stages in plasma generation and acceleration. The emission spectrum of the discharge was obtained using the Optosky linear spectrometer, allowing for an analysis of the plasma composition and the determination of the thrust source. Changes in the current strength of the spark and main discharges over time were measured using a Rogowski coil.