Assessment of Silicon and Rhenium Recovery Efficiency from Copper-Containing Tailings of Processing Plants

Eng—Advances in Engineering, 2025

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.3390/eng6040077
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

In the face of the global depletion of natural resources and increasing demand for sustainable development, processing industrial waste, such as tailings from processing plants, is becoming essential. This study focuses on combined processing technologies, including flotation concentration and concentrate processing, allowing the efficient recovery of valuable components. This study aims to investigate the possibility of thermochemical enrichment and the opening of low-grade copper tailings of processing plants with the transfer of silicon and rhenium in the form of silicate-ions and perrhenate-ions into a solution with the output of a multifactor multiplicative model and obtaining tabular nomograms. Multifactor experiments on the thermochemical enrichment of rough copper concentrates made it possible to construct partial dependences of silicon and rhenium extraction into a solution and to obtain multiplicative Protodyakonov–Malyshev models of these processes and multifactor nomograms over a wide range of temperatures, durations, and alkali-to-concentrate ratios to determine the maximum recovery rates. The developed multifactor models made it possible to establish the optimal intervals of changes in the concentrate sintering parameters, providing high recovery rates (over 85% of silicon and 98% of rhenium) during subsequent water leaching. Optimal sintering conditions (temperature of 350 °C, the duration of 90 min, and the ratio of NaOH to concentrate = 1:2) ensured a recovery of up to 85% of silicon and 98% of rhenium from the concentrate into the solution. This recovery rate reduces the need for primary raw materials and positively affects the production’s environmental performance because it minimizes the amount of industrial waste disposal.